BLKQQ - PRIMER-EPOXY ORGANIC COATING, F-8501

  • MSDS: BLKQQ
  • Manufacturer: SEAGRAVE COATINGS CORP
  • Product Name: PRIMER-EPOXY ORGANIC COATING, F-8501
  • National Stock Number: 8010-00N020984
Product Identification

Product ID:PRIMER-EPOXY ORGANIC COATING, F-8501
MSDS Date:08/14/1991
FSC:8010
NIIN:00N020984
MSDS Number: BLKQQ

Responsible Party
SEAGRAVE COATINGS CORP
320 PATERSON PLANK RD
CARLSTADT, NJ 07072-2302
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 201-933-1000

Cage: DO631

Contractor
SEAGRAVE CORP TITANINE DIVISION
CARLSTADT, NJ 07072-2302 US

Telephone: 1-800-424-9300

Cage: 78767

Ingredients

AND/OR UV RADIATION MAY CAUSE THE FORMATION OF HCL

RTECS: 9999999ZZ


APPLICATN UNLESS AIR MONITORING RECORDS VAP/MIST

RTECS: 9999999ZZ


TLV LIMIT. USE ONLY WITH ADEQUATE VENTILATION.

RTECS: 9999999ZZ


EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR

RTECS: 9999999ZZ


EXPOSED TO CHLOROCARBONS .

RTECS: 9999999ZZ


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5 - 10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9192


ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER;

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 25%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 5%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


STRONIUM CHROMATE (AS CR) (+)

CAS: 7889-06-2

Fraction By Weight: 15%

OSHA PEL 0.1 MG(CRO*2)/M3

ACGIH TLV: 0.05 MG(CR)/M3


EPOXY RESIN (SOLUTION - MIXTURE)

Fraction By Weight: 15%


PHENOL, 4,4'-ISOPROPYLIDENEDI-,DIMER W/1-CHLORO-2,3-EPOXY

CAS: 25068-38-6

RTECS: SL6310000

Fraction By Weight: 15%


NO SMOKING IN AREA OF USE. DO NOT USE IN

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:BREATHING OF HIGH VAPOR CONCENTRATION
MAY PRODUCE NARCOSIS. LIQUID MAY CAUSE MINOR SKIN IRRITATION AND
DEFINITE EYE IRRITATION. CAUSES NOSE AND THROAT IRRITATION. CAUSES
EYE IRRITATION. CAUSES SKIN IR RITATION. HARMFUL IF SWALLOWED.
REPEATED & PROLONGED OVEREXPOSURE TO SOLVENTS COULD CAUSE (SEE EFTS
OF OVEREXPOS)
Explanation of Carcinogenicity:CHROMATE: CLASS 1 (NTP/IARC).
Effects of Overexposure:HLTH HAZ: PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING CONTENTS MAY BE HARMFUL/FATAL. BIRTH DEFECT HAZARD.
CONTAINS INGREDS WHICH CAN CAUSE BIRTH DEFECTS. CONTAINS INGREDS
WHICH MAY CAUSE ORGAN DMG. CHLOROCARBON MATLS HAVE (SEE SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, RESTORE BREATHING. CALL MD. SKIN:
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES WHILE REMOVING
CONTAM CLTHG/SHOES. CALL MD IMMEDIATELY. WASH CLOTHING/SHOES BEFORE
REUS E. EYE: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. CALL MD. INGEST: DO NOT INDUCE VOMITING. CALL MD
IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.

Fire Fighting

Flash Point Method:SCC
Flash Point:21.0F,-6.1C
Lower Limits:1.1%
Upper Limits:36.0%
Extinguishing Media:DRY CHEMICAL, CO2, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
& FULL PROTECTIVE EQUIPMENT . IF WATER IS USED FOG NOZZLES ARE
PREFERRED. FLAMMABLE - CLASS IB.
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. VAPS MAY
MIGRATE TO IGNIT SOURCE & CAUSE FLASH FIRE. ISOLATE FROM HEAT,
SPARKS, ELEC EQUIP, APPLIANCES, PILOT LIGHTS, (SEE SUPP DATA)

Accidental Release

Spill Release Procedures:IN CASE OF SPILLAGE ABSORB WITH INERT MATERIAL
AND DISPOSE OF IN ACCORDANCE WITH APPLICABLE REGULATIONS OF EPA AND
OTHER LOCAL, STATE AND FEDERAL AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT, SPARKS & OPEN
FLAME. AVOID PRLNGD SKIN CONT.DO NOT BREATHE SPRAY MIST. STORE IN
COOL, DRY AREA W/VENT SUITABLE FOR STORING MATLS
Other Precautions:GROUND CNTNRS WHILE POURING.AVOID SPONTANEOUS COMBUST
OF CONTAM RAGS/OTHER ORG MATLS.EMPTY CNTNRS MAY RETAIN HAZ
PROPERTIES & CAN BE DANGEROUS.DO NOT USE ON TOYS/FURNITURE/SURF OF
OTHER ARTICLES THAT MIGHT BE CHEWED BY CHILDREN.(SEE ING 10)

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD RESP TYPES SUITABLE FOR MATLS
IN INGRED SECTION. NIOSH/MSHA APPRVD CHEM/MECH FILTERS REC WHEN
VENT IS RESTRICTED. DO NOT BREATHE (DUST, VAPS/SPRAY MIST). WEAR
APPROP, NIOSH/MSHA APPR VD RESP DURING & AFTER (SEE ING 12)
Ventilation:SUFFICIENT VENT, IN VOLUME & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM Protective Gloves:CHEM RESISTANT PLASTIC/RUBBER.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FACESHLD
Other Protective Equipment:AS REQ TO AVOID WETTING CLTHG. USE PROT
CREAMS WHERE SKIN CONT IS LIKELY. EYEBATH AND SAFETY SHOWER.
Work Hygienic Practices:AVOID CONTACT WITH EYES, SKIN & CLTHG. WASH
HANDS THOROUGHLY AFTER USING AND BEFORE SMOKING AND EATING.
Supplemental Safety and Health
EXPLO HAZ: FLAMES & OTHER SOURCES OF IGNIT. FLAM LIQ & VAP. THERM
DECOMP PRODS MAY INCLUDE HCL & PHOSGENE . MATL TO AVOID: ALUMINUM &
ZINC POWDERS SHOULD BE AVOIDED. EFTS OF OVEREXP: PRODUCED SE NSIT
OF MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & COULD HAVE A SIMILAR
EFT IN HUMANS. ADRENOMIMETICS (E.G. (SEE ING 14)

Chemical Properties

HCC:F5
Boiling Pt:B.P. Text:148F,64C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Appearance and Odor:LIQUID WITH A CHARACTERISTIC ODOR.
Percent Volatiles by Volume:61.2

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS. ALUMINUM IS NOT ACCEPTABLE FOR PUMPS, MIXERS,
FITTINGS, STORAGE TANKS. METALLIC (SEE SUPP DATA)
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OR OPEN FLAME.
Hazardous Decomposition Products:HCL, PHOSGENE .

Disposal

Waste Disposal Methods:PLACE IN CLOSED CONTAINERS. DISPOSE OR PRODUCT
IN ACCORDANCE WITH LOCAL, COUNTY, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.